Direct Factory Bulk Procurement for CG613L Anti-Inversion Liquid Additive

For chemical procurement managers, oilfield supply chain directors, and cementing service providers, securing liquid additives that streamline wellsite slurry preparation while mitigating downhole risk is paramount. CG613L Anti-Inversion Fluid Loss Additive Liquid is a high-performance synthetic polymer liquid specifically formulated for normal-density freshwater cement slurries operating up to 180℃ (356℉). Manufactured by Tianjin Kelioil, CG613L addresses the critical industry challenge of "inverted defects" in standard polymer additives, where improper thickening time extension or strength reversal occurs across thermal gradients.

In field applications, conventional polymer fluid loss additives often display inversion behavior-causing extended thickening times or delayed compressive strength development at the upper sections of the cement sheath. CG613L liquid provides precise filtration control (≤50 ml) while preventing thickening time and strength reversal. This unique anti-inversion performance guarantees rapid early strength development at the top of the cement column, protecting well integrity while allowing service operators to minimize Waiting-on-Cement (WOC) time.

Available in both standard liquid formulation (CG613L) and anti-freezing low-temperature formulation (CG613L-A), Kelioil supports cold-climate and offshore drilling campaigns. Operating a 30,000-square-meter production park with an annual synthesis capacity exceeding 10,000 tons, Tianjin Kelioil guarantees competitive direct factory pricing, flexible drum or IBC tote export packaging, and batch-to-batch polymer stability for global contract deliveries.

Factory Certified Technical Specifications & Commercial Indicators

The table below outlines certified physical and slurry performance indicators for CG613L liquid, serving as an authoritative quality benchmark for bulk purchase agreements and technical quality verification.

Commercial Value & Anti-Inversion Chemical Performance Benefits

From a supply chain and wellsite efficiency perspective, CG613L liquid offers substantial operational advantages over dry powders. Liquid additives allow rapid, homogenous inline liquid dosing during continuous mixing operations without dust generation or dissolution delays. Combined with Kelioil's anti-inversion polymer design, CG613L ensures high slurry stability and operational safety.

Key procurement and commercial advantages of selecting CG613L include:

• Prevention of Thickening & Strength Reversal: Completely solves the inversion defects of conventional polymers, ensuring smooth thickening curves and eliminating setting delays at the top of long cement columns.
• Direct Liquid Metering & Rapid Mixing: Disperses instantly in mixing water, saving operational preparation time and reducing labor costs during continuous cementing operations.
• Anti-Freezing Option for Extreme Climates: CG613L-A provides excellent low-temperature fluidity for arctic, winter, or offshore cementing without polymer crystallization.
• High Filtration Control Efficiency: Achieves tight fluid loss control (≤50 ml) in normal density freshwater slurries at recommended dosage rates .
• Rapid Early Compressive Strength: Reaches $\ge 14.0\text{ MPa}$ within 24 hours, dramatically cutting rig Wait-on-Cement (WOC) downtime expenses.

Target Wellbore Conditions & Commercial Application Scenarios

CG613L liquid is recommended for bulk integration into diverse oilfield cementing programs:

• Normal-density freshwater cement slurry systems requiring reliable filtration control.
• Medium to high-temperature oil and gas wells with bottom-hole circulating temperatures up to 180℃ (356℉).
• Cementing jobs with long sealing sections where top-of-cement over-retardation must be strictly prevented.
• Automated liquid-dosing cementing units requiring rapid chemical dispersion without dry-blending.
• Cold-weather and offshore drilling operations utilizing anti-freezing liquid formulations (CG613L-A).

Global Field Operations & Proven Onshore Performance

CG613L liquid has been extensively deployed in onshore deep-well cementing operations. In a recent production casing cementing project targeting a 4,200-meter vertical well, the operating contractor required a freshwater slurry system with predictable thickening behavior and zero top-of-cement strength delay.

CG613L standard liquid was metered directly into the field batch. The slurry maintained constant viscosity during displacement, resulting in clean pressure displacement and excellent zonal isolation confirmed by acoustic cement bond logging.

Strict Quality Control & Centralized R&D Verification

Located in Hengtong Enterprise Port, Xiqing District, Tianjin, Kelioil's centralized R&D facility monitors quality across all commercial production lots of CG613L. Every liquid batch undergoes precise viscosity, density, and active polymer concentration checks to meet strict API Spec 10A standards.

Our experienced chemical team provides pre-shipment verification using customer-supplied cement samples, assuring seamless slurry compatibility prior to export dispatch.

International Certifications & Green Factory Manufacturing Compliance

Tianjin Kelioil operates in total compliance with international petroleum industry management standards. Our modern chemical plant maintains ISO 9001 Quality Management System, ISO 14001 Environmental Management System, and ISO 45001 Occupational Health and Safety certifications.

Recognized as an official national Green Factory, Kelioil utilizes closed-loop liquid synthesis and automated liquid drumming lines, ensuring eco-conscious additive manufacturing for international energy clients.

Export Packaging Specifications, Warehousing & Global Shipping

CG613L liquid is supplied in 25 kg plastic pails, 200 L heavy-duty plastic drums, or 1,000 L IBC totes to suit varying logistics requirements. All drums are palletized and shrink-wrapped for secure sea container transit.

Liquid products retain a shelf life of 12 months when stored in dry, shaded environments ($5\text{--}35^\circ\text{C}$). Located near Tianjin Port, Kelioil manages fast container loading, export customs clearance, and global ocean transport.

Commercial & Technical Comparison: CG613L vs Standard Liquid Additives

The comparison matrix below highlights the total operational and financial advantages of procuring CG613L anti-inversion liquid over standard liquid fluid loss additives:

Global Supply Partnerships & Energy Trade Exhibitions

Tianjin Kelioil actively engages with international service companies and oilfield chemical importers at leading global energy trade exhibitions. We establish long-term contract relationships grounded in transparent factory pricing, flexible packaging, and dependable quality control.

Our export service team provides rapid sample dispatch, competitive freight rates, and full compliance documentation including MSDS, COA, and technical data sheets for hassle-free customs clearance.

Industrial Manufacturing Scale & On-Time Delivery Commitment

Located in Ninghe, Tianjin, Kelioil's 30,000-square-meter manufacturing complex houses high-capacity liquid polymerization reactors, automated filling lines, and raw material storage tanks capable of filling multi-container orders efficiently.

With automated multi-line production capabilities, Kelioil guarantees steady delivery schedules and reliable supply continuity for international drilling projects.

Frequently Asked Questions (FAQ) - CG613L Bulk Supply

1. Q: What maximum BHCT can CG613L adapt to in oilfield cementing?
A: CG613L fits well under 60℃ shallow oil wells to 180℃ (356℉) high-temperature oil wells, optimized by our professional R&D team.

2. Q: What is the recommended mixing dosage of CG613L cement additive?
A: Standard mixing range is 2.0%–6.0% BWOC for liquid product, adjustable for custom slurry formula.

3. Q: Can CG613L match high-density cement slurry system for complex wells?
A: Fully compatible with all cement density formulas, supported by lab verification.

4. Q: What solvent can dissolve packaged CG613L liquid additive?
A: Fresh water, seawater, and 2% CaCl2 brine are available, mixing guidance provided for bulk orders.

5. Q: Can you customize packaging specifications and bulk CG613L formula?
A: Personalized packaging & formula solutions with full technical follow-up.

Partner with Kelioil - Your Trusted CG613L Bulk Additive Supplier

Tianjin Kelioil Engineering Material and Technology Co., Ltd. is led by a specialized team of senior chemical engineers, polymer chemists, and international logistics directors based in Hengtong Enterprise Port, Xiqing District, Tianjin. Holding 10 invention patents and 2 software copyrights, our R&D and executive management bring extensive experience in developing advanced fluid loss control solutions for global energy projects.

We are dedicated to providing responsive technical support, rapid pre-shipment sample dispatch, and tailored OEM/ODM liquid filling solutions for oilfield service operators and distributor partners. Whether you require anti-freezing formulations (CG613L-A), customized drum labeling, or slurry compatibility testing with your local cement, our team is committed to fulfilling your procurement goals with direct factory value and uncompromised quality.

If you need technical data sheet, bulk quotation or customized cement slurry formula of CG613L, please send your demand via inquiry channel, our R&D and management team will reply within 24 working hours.