447542989645
abroadsales8@kelioil.com
enEnglish
Category
The Fluid Loss Tester Manufacturer!

 

Tianjin Kelioil Engineering Material and Technology Co., Ltd. is a high-tech enterprise specializing in the independent R&D and large-scale production of oilfield cementing additives.

 

 
 

Why choose us

Quick response

We promise to respond to your inquiries within 24 hours to ensure that you receive the information and support you need in a timely manner.

Strong production capacity

Koli Petroleum has added four new production lines, including vacuum drying powder production line and liquid polymer synthesis production line, all of which are fully automated with human-machine interactive control, with a total production capacity of 10,000 tons/year.

Complete qualifications

It has passed ISO14001, ISO9000 and GB/T28001 certifications, and the powdered AMPS polymer fluid loss reducer has won the "National Key New Product" certificate.

 

Max. Temperature

260℃

Max. Working Pressure

14MPa

Input Voltage

AC100-110V 60Hz/220V 50Hz

Input Power

1300W

Dimensions (W*D*H)

30*32*80cm

Weight

36.5kg

Heater Power

1200W

Slurry Cup Volume

450ml

 

 
Advantages of Fluid Loss Tester
 
01/

Compact & Portable Design​
Lightweight (36.5 kg) and space-saving dimensions (30×32×80 cm) make it easy to transport and set up. Ideal for lab research, field testing, and on-site cement slurry evaluations.

02/

Clog-Resistant Filtration System​
Optimized fluid flow path minimizes blockages, even with high-solid-content slurries.
Ensures consistent test results and reduces downtime between experiments.

03/

Low-Cost, Easy-to-Replace Filter Screens​
Uses standardized, affordable filter screens instead of expensive proprietary filters.
Reduces long-term operational costs while maintaining high filtration accuracy.

04/

User-Friendly Operation & Durability​
Intuitive controls and modular design simplify setup and maintenance.
Robust construction ensures longevity in demanding testing environments.

 

Procedures Of Fluid Loss Test
 
  • Check that the rubber gasket is seated correctly in the base of the filter press mud chamber, insert the circular gauze frame, and place Whatman No. 50 filter paper on top of the gauze frame.
  • Place a rubber gasket on top of the filter paper, engage the pins on the cylindrical body of the mud chamber with the slots in the base, and twist firmly to lock the assembly together.
  • Fill the mud chamber with mud, keeping the air gap at the top minimum.
  • Place the mud chamber in the filter press frame, check that the rubber gasket is seated correctly in the mud chamber lid, and place it over the cylindrical body of the mud chamber.
  • Turn the screw in the filter press frame to lock and seal the lid firmly down on the mud chamber.
  • Place a graduated measuring cylinder on the adjustable platform below the mud chamber and adjust the height so that filtrate can be collected from the discharge tube in the base of the mud chamber.
  • Insert a new CO2 cartridge in the pressure assembly on the lid of the mud chamber.
  • Adjust the pressure regulator to apply 100 psi to the mud chamber and record the start time.
Fluid Loss Tester for Cement

 

Low Temperature Static Fluid Loss Tester
  • Measure the spurt loss volume recovered in the graduated measuring cylinder during the first few seconds if it is significant.
  • Check the pressure gauge regularly to ensure 100 psi is maintained throughout the 30-minute test period.
  • When the 30-minute test period is over, close the pressure regulator, pull the red bleed-off knob to release the pressure in the mud chamber, and record the volume of filtrate collected in the graduated measuring cylinder, which is reported as fluid loss in milliliters.
  • Carefully dismantle the mud chamber without damaging the filter cake on the filter paper.
  • Remove the filter paper and gently rinse off the surface mud on the filter cake.
  • Measure the thickness of the filter cake to the nearest 1/32 nd of an inch, and note any relevant observations about filter cake quality (e.g., firm, slick, etc.).
  • Use the filtrate collected in the graduated measuring cylinder for the chemical analysis part of the mud checks.
  • Remove the used CO2 cartridge from the pressure assembly.
  • Wash the filter press components thoroughly and leave them to dry in preparation for future tests.

 

Quality Control and Assurance of Fluid Loss Test

 

 

Repeatability of Tests
To ensure the reliability of the test results, it is recommended to conduct multiple tests on the same sample or on different samples from the same batch. The results of these tests should be consistent within a certain tolerance range.
If there are significant variations in the test results, it may indicate a problem with the sample collection, equipment calibration, or test procedure. In such cases, the tests should be repeated after identifying and correcting the issues.

 

Traceability of Results
Keep detailed records of all fluid loss tests, including the sample information, test conditions, and results. These records can be used for quality control purposes, as well as for troubleshooting and auditing.

 

FAQ

Q: What are the two types of fluid loss?

A: Isotonic water loss occurs when water and sodium are lost together. Causes of isotonic water loss are vomiting, diarrhea, sweating, burns, intrinsic kidney disease, hyperglycemia, and hypoaldosteronism. Hypertonic dehydration occurs when water losses exceed sodium losses.

Q: What is the most accurate way to measure fluid loss?

A: The measurement of total body water via D2O is the most accurate measure to detect changes in body fluid content; other methods, including bioelectrical impedance, are less accurate.

Q: How can i get the price?

A: We usually quote within 24 hours after we get your inquiry(Except weekend and holidays). If you are very urgent to get the price, please email us or contact us in other ways so that we can offer you a quote.

Q: Can I buy samples placing orders?

A: Yes.Please feel free to contact us.

Q: What is your lead time?

A: It depends on the order quantity and the season you place the order. Usually we can ship within 7-15 days for small quantity,and about 30 days for large quantity.

Q: What is your payment term?

A: T/T,Western Union,Alipay,MoneyGram,and Paypal.This is negotiable.

Q: What is the shipping method?

A: It could be shipped by sea,by air or by express(EMS,UPS,DHL,TNT,FEDEX and ect).Please confirm with us before placing orders.

Tianjin Kelioil Engineering Material and Technology Co., Ltd. is one of the most professional fluid loss tester manufacturers and suppliers in China, featured by quality products and low price. Please rest assured to buy fluid loss tester for sale here from our factory. Contact us for free sample.

fluid loss analysis report tester, Static Fluid Loss Tester, fluid loss data sheet tester
Popular Products
Send Inquiry