Tianjin Kelioil Engineering Material and Technology Co., Ltd. is one of the leading manufacturers and suppliers of api fluid loss test in China. Please feel free to buy high quality api fluid loss test at low price from our factory. If you have any enquiry about free sample, please feel free to email us.
- The newly developed fluid loss cylinder prevents frequent clogging during the fluid loss test and is simple to clean.
- A quick-release connector is adopted for the high-pressure gas channel.
- Thanks to advanced technology, the filter screen boasts enhanced durability.
- The instrument comes with a timer and an alarm, and the alarm can be easily deactivated.
- The instrument's surface is constructed from stainless steel.
- Quick- disconnect Connector for High-pressure Gas Passage
|
1.Preparation for connection: Connect the endcap, valve, and high-pressure gas passage connector, then secure them tightly. |
2.Insert the high-pressure gas passage connector into the high-pressure manifold-there's no need to screw it in. |
3.Insert the pin into the hole to finish the connection. |
Technical Parameters
|
Max. Temperature |
260℃ |
Max. Working Pressure |
14MPa |
|
Input Voltage |
AC100-110V 60Hz/220V 50Hz |
Input Power |
1300W |
|
Dimensions (W*D*H) |
30*32*80cm |
Weight |
36.5kg |
|
Heater Power |
1200W |
Slurry Cup Volume |
450ml |
In a cementing lab, a fluid loss tester replicates downhole environments to examine how well cement slurry retains water. It helps refine formulations by adjusting additives and ratios, while ensuring adherence to standards such as API. This instrument safeguards cement integrity, cuts costs by minimizing field failures, allows for precise engineering in complex wells, and is crucial for developing strong slurries-bridging lab research and field performance. Key terms include: fluid loss tester, cement slurry, downhole replication, formulation refinement, industry specs, integrity, cost reduction, precision.
Plant Strength
Tianjin Nithons Technology Co., Ltd., is a Sino-Japanese joint venture that specializes in testing instruments for oil well cementing. Founded on February 1, 2013, and based in Tianjin, the company adheres strictly to API standards. It develops and manufactures a complete line of instruments and accessories for oil well cementing testing, spanning slurry preparation, curing, thickening, fluid loss, and other related processes. Boasting strengths in research and development, production management, and product design, its products have gained high recognition in China and are also sold internationally. Another subsidiary under its parent group focuses on cement additives, allowing the group to provide one-stop services.
When operating a fluid loss tester in a cementing laboratory, the procedure begins with thoroughly cleaning all components and preparing the cement slurry as per the specified formulation. Next, place a clean filter disk inside the fluid loss cell, carefully pour in the prepared slurry, and ensure the cell is sealed firmly. Subsequently, adjust the temperature and pressure settings to mimic downhole conditions. Once these parameters have stabilized, start the timer and closely observe the process for the standard testing period of 30 minutes. Upon completion of the test, measure the volume of the collected filtrate, release the pressure within the cell, clean and disassemble the equipment, and analyze the results. This analysis involves comparing the measured fluid loss value against the target or standard benchmarks to assess the performance of the cement slurry, and making adjustments to the formulation as required.
Hot Tags: api fluid loss test, China api fluid loss test manufacturers, suppliers, factory, fluid loss separation tester, fluid loss density tester, fluid loss quality report tester, fluid loss educational material tester, Stirred Fluid Loss Tester, fluid loss test report tester
