Tianjin Kelioil Engineering Material and Technology Co., Ltd. is one of the leading manufacturers and suppliers of hthp fluid loss test procedure in China. Please feel free to buy high quality hthp fluid loss test procedure at low price from our factory. If you have any enquiry about free sample, please feel free to email us.
- Newly - designed fluid loss cylinder can avoid getting blocked frequently during fluid loss process and it is easy to clean.
- Quick - disconnect connector for high - pressure gas passage is used.
- With new technique, the filter screen is more durable.
- The instrument is equipped with a timer and an alarm; the alarm sound can be turned off easily.
- Surface of the instrument is made of stainless steel.
- Quick- disconnect Connector for High-pressure Gas Passage
|
1.Preparation for connection.Connect and fasten the endcap,valve and connector forhigh-pressure gas passage. |
2.Insert the connector forhigh-pressure gas passageforinto theconnectorhigh-pressure manifold withno need to screw down them. |
3.Insert the pin into the holeto complete the connection. |
Technical Parameters
|
Max. Temperature |
260℃ |
Max. Working Pressure |
14MPa |
|
Input Voltage |
AC100-110V 60Hz/220V 50Hz |
Input Power |
1300W |
|
Dimensions (W*D*H) |
30*32*80cm |
Weight |
36.5kg |
|
Heater Power |
1200W |
Slurry Cup Volume |
450ml |
In a cementing laboratory, a fluid loss tester simulates downhole conditions to test cement slurry water-retention, optimizes formulations via additive/ratio adjustments, and ensures compliance with standards like API. It guarantees cement integrity, saves costs by reducing field failures, enables precision engineering for complex wells, and is vital for robust slurry design, linking lab R&D and field reliability-key keywords: fluid loss tester, cement slurry, downhole simulation, formulation optimization, industry standards, integrity, cost-saving, precision.
Plant Strength
NITHONS, namely Tianjin Nithons Technology Co., Ltd., is a Sino - Japanese joint - venture enterprise specializing in oil well cementing testing instruments. Established on February 1, 2013, it's located in Tianjin. It strictly follows API standards, developing and manufacturing a full range of instruments and accessories for oil well cementing testing, covering slurry preparation, curing, thickening, fluid loss, etc. It has advantages in R & D, production management and product design, with products highly recognized in China and sold overseas. Its affiliated group's other subsidiary focuses on cement additives, enabling one - stop services.
To use a fluid loss tester in a cementing laboratory, first clean all components and prepare the cement slurry according to the formulation. Then, insert a clean filter disk into the fluid loss cell, pour in the slurry, and seal the cell tightly. Set the temperature and pressure to simulate downhole conditions, start the timer once stabilized, and monitor the process for 30 minutes (standard duration). After the test, measure the filtrate volume, release the pressure, clean and disassemble the equipment, and analyze the results by comparing the measured fluid loss value with the target or standard to evaluate the slurry performance and adjust the formulation if needed.
Hot Tags: hthp fluid loss test procedure, China hthp fluid loss test procedure manufacturers, suppliers, factory, fluid loss rate tester, fluid loss specification tester, fluid loss technical document tester, fluid loss saturation tester, fluid loss test report tester, fluid loss measurement report tester
