Cement Static Gel Strength Tester

Tianjin Kelioil Engineering Material and Technology Co., Ltd. is one of the leading manufacturers and suppliers of cement static gel strength tester in China. Please feel free to buy high quality cement static gel strength tester at low price from our factory. If you have any enquiry about free sample, please feel free to email us.

1.Connect the water inlet and outlet, the inlet and outlet of the coolant.

2.Connect the network port and USB port of the instrument to the computer interface with wires.

3.Connect the power cord. Turn on the power switch and computer software. Set the connection parameters, and check whether the communication connection is proper.

4.Check the slurry cup sealing ring and the U-shaped pipe connecting with cup. The sealing ring needs to be replaced when it is aged or damaged, and the U-shaped tube must not be blocked. Pay attention that the metal sealing ring cannot be installed in the opposite direction.

5.Apply a thin layer of high-temperature grease to the inner wall and the threads of the cup, as well as the sealing rings and threads of the upper and the lower caps to facilitate cleaning.

6.Install the bottom cap on the lower end of the cup. (Pay attention to the direction of the cup.) Tighten it manually and twist it back 1/8 turn for easy removal later.

7.Apply a thin layer of coupling agent to the front ends of the transducers on the upper and lower caps, connect the wires, and install them into the upper and lower caps respectively.

8.Then fix the installed cup and lower cover on the bench clamp, put the ruler into the slurry cup, and prepare the upper cap. Prepare to pour cement slurry.

9.Pour the prepared cement slurry into the slurry cup (about 200cc). Pay attention that the cement slurry level is between the upper and lower limits of the scale. Do not make cement slurry stain other parts of the cup. If it is stained, wipe the cement slurry with a cloth.

10.Pour a small amount of water along the inner wall of the cup to the water level mark of the ruler.

11.Manually screw the top cap into the cup. A small amount of water will flow out from the pressurized and thermocouple hole, indicating that there is no air in the kettle. Tighten the cup manually, and then twist it 1/8 turn back to facilitate the disassembly process.

12.Clean the outside wall of the slurry cup and put it into the heating mantle. At the same time, pass the wire at the bottom of the cup through the hole at the bottom of the heating mantle. This step requires two people to operate: one to pass the wire and one to place the cup. Be careful not to bend the wire severely to avoid damage.

13.After placing the slurry cup, slightly turn it clockwise to align the pressure hole on the top cap with the thread of the U-shaped pipe.

14.First tighten the nuts at both ends of the U-shaped pipe with hands, and then tighten the nuts with a wrench.

15.Insert the thermocouple into the hole in the top cap. In order to release the air in the cup, please do not tighten the nut. Connect the thermocouple wire plug and the transducer wire plug to the corresponding parts of the instrument.

16.Turn on the pump water supply switch on the instrument. After the water flows out from the small hole at the thermocouple connection of the top cap, tighten the nut with a wrench and wipe away the flowing water.

17.Set experimental parameters such as pressure and temperature in the software.

18.Turn on the pump switch to pressurize the cement, and turn on the heating switch. At this time, the water supply switch, pump switch and heating switch of the pump are all on.

19.Click the Start in the software to start the experiment.

Nithons own factories have reached a remarkable milestone by achieving ISO9001, ISO14001, and ISO45001 certifications.

Hot Tags: cement static gel strength tester, China cement static gel strength tester manufacturers, suppliers, factory, Cement Static Gel Strength Tester, gel strength tester, Ultrasonic Cement Analyzer, Static Gel Strength Tester, Ultrasonic Static Gel Strength Tester